Mini Max TSSO and TSSO2 Water Hammer Arrestor

MM-500 TSSO & TSSO2
Description:
A maintenance-free installation is assured when using this type of arrestor...the only moving part is the free-moving piston furnished with “O”ring seals which have been tested for reliability in excess of normal operating ranges.
Features:
  • LEAD FREE
  • Only One Moving Part
  • Specified for MANY Installations
  • Maintenance FREE
Application:
A maintenance-free installation is assured when using this type of arrestor...the only moving part is the free-moving piston furnished with “O”ring seals which have been tested for reliability in excess of normal operating ranges.
SPECIFICATIONS & INSTALLATION
CONSTRUCTION:
Barrel-fabricated of type "L" hard drawn copper
CAP: Machined of free turning brass, attached to barrel
with 95-5 solder.
PISTON: Machined of C 96300 Low Lead Brass
SEALS: EPDM Seal
SEAL LUBRICANT: Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems.
NICKEL PLATED: For salt water application.
OPERATING PRESSURE: Designed to operate on all domestic and commercial systems. Normal operating pressure 0 to 200 PSI. Max spike pressure 400 PSI.
TEMPERATURE: -40° F to + 212°  F (-4.4°  C to +100°  C)
INSTALLATION:
May be installed in new or existing plumbing systems with a standard pipe tee. No access panel required (Consult local code).
Can't Find what you are looking for?
Please contact us at 503-328-6705 for TECHNICAL/SALES Support.